Maintenance Schedule; Blades Conforming To En13236 - Husqvarna K3600 MKII Operator's Manual

Maintenance schedule

CAUTION! The chart is based on daily use of the equipment.
Support and guide rollers
Check the support rollers with regard to wear.
Check the guide rollers with regard to wear.
Lubricate the guide rollers.
Hydraulic System
Inspect the hydraulic hoses.
Inspect and clean the water nozzle.
Drive system
Check the condition of the drive wheel.
Water system
Inspect and clean the water nozzles on the water disc.
Inspect the water adjustment control.
Check the filter in the water coupling.
Controls
Check that the controls work.
Blade
Check the condition of the blade guard.
Check the water disc.

Blades conforming to EN13236

Husqvarna K3600 MKII only conforms to 98/37/EC and EN13236 together with the blades listed below:
Type Diameter, mm
Husqvarna
PXR XX 350
ELR XX (5,6 / ,220) 350
SLR XX 350
R550-0355 (5,6 mm) 350
R530-0355 350
R510-0355 (5,6 mm) 350
Note: The blades are available in different hardnesses for different materials, this is stated with two digits, XX.
18 –
English
MAINTENANCE
Daily Twice a week
X
X
X
X
X
X
X
X
X
X
X
X