Table of Contents
Advertisement
Remove the display assembly:
1.
Disconnect the following cables and grounding tape from the system board and cable routing
clips:
(1) Display panel cable
(2) Display panel cable grounding tape
(3) WLAN cables
(4) WWAN cables (select models only)
(5) Microphone cable
CAUTION:
support the display assembly can result in damage to the display assembly and other device
components.
2.
Remove the 2 Phillips PM2.5×5.0 screws (1) that secure the display assembly to the device.
3.
Remove the display assembly (2).
70
Chapter 4 Removal and replacement procedures
Support the display assembly when removing the following screws. Failure to
Hide quick links:
Advertisement
Table of Contents
