HP Mini 5102 Maintenance And Service Manual page 110

Select
Device configurations
102 Chapter 5 Computer Setup
To do this
●
Enable Fn Key Switch
●
Enable/disable USB legacy support. When enabled,
USB legacy support allows the following:
◦ Use of a USB keyboard in Computer Setup even
when your operating system is not running.
◦
Startup from bootable USB devices, including a
hard drive, diskette drive, or optical drive
connected by a USB port to the computer.
●
Enable/disable fan always on while connected to an AC
outlet.
● Enable/disable Data Execution Prevention (select
models only). When enabled, the processor can disable
some virus code execution, which helps to improve
computer security.
● Enable/disable LAN power saving mode.
●
Set the SATA (Serial Advanced Technology
Attachment) device mode. The following options are
available:
◦ AHCI (Advanced Host Controller Interface)
◦
IDE (Integrated Drive Electronics)
●
Enable/disable HP QuickLook.
● Enable/disable HP QuickLook preboot authentication on
HP QuickLook boot.
●
Enable/disable HP QuickWeb.
● Enable/disable HP QuickWeb: Write Protect (disabled
by default).
●
Enable/disable Intel® HT Technology.
●
Enable/disable Wake on USB (disabled by default).
● Enable/disable Numlock state at boot: Off /On (disabled
by default).