Epson MovieMate 62 User Manual page 81

Epson MovieMate® 62
Connect up to 3 video devices and use the remote control to switch
between them. You can also connect a microphone or USB thumb drive.
Other Connections
Quick Setup
Before using the projector, make sure you read the safety instructions in the
on-screen User's Guide.
HDMI
cable
(optional)
RCA video cable
(composite video) Audio cable
(optional) (optional)
Component
video cable
(optional)
USB flash drive
Microphone
( § I
@i-~ ~ ~ c®
[Li]
C@C®C®
2
Insert your DVD into the slot. The projector will power on automatically.
3
Open the lens cover slide all the way. Your movie will be displayed.
See" Adjust the image" for more information.
Playa DVD
1
Plug in the projector. The
C)
power light on the projector turns orange.
Connect the projector
Choose from the following connections:
Turn on your equipment
Computer Monitor Port
Connect a computer using a VGA cable (optional).
NOTE: If you're playing
a
OVO, see "Playa OVO" instead.
1
Turn on your computer or video source.
2
Plug in the projector. The
C)
power light on the projector turns orange.
If you are using a notebook, switch it to external display. If you're using a
PC notebook, hold down the Fn key on the keyboard and press the function
key that lets you display on an external monitor. It may have an icon such as
BID,
or it may be labelled CRT/LCD. Allow a few seconds for the projector
to sync up after pressing it. Check your notebook's manual or online help for
details. You can also connect an audio cable.
3
Open the lens cover slide all the way.
II1111111111111111111111111111111111111111111111111111I
*411950100*