Multi-Functional Digital Speedometer - KTM 640 LC4 SUPERMOTO 2003 Owner's Manual

1
6
CLOCK
TRIP 1
TRIP 2
TRIP F
2 3
TEST
WS
ODO

Multi-functional digital speedometer

The universal instrument is divided into 3 parts.
1
Use the MODE and SET button to change the display and the basic set-
tings in the display.
2
Display shows all of the information that may be of interest to you. 5
display modes can be selected with the MODE button.
The indicator lamps 3 provide additional information on the motorcycle's
running condition.
Display
TEST
When you switch on the ignition, all of the display elements will light up for
1 second for the function test.
WS (wheel size)
The display will change and show the diameter of the front wheel in inches
for 1 second (WS = wheel size).
Then the CLOCK mode will be displayed, or the mode that was active
when the ignition was switched off.
CLOCK
You will recognize the CLOCK display by the blinking dots between the
hours and minutes. It displays the speed, temperature of the cooling liquid
and the clock.
To switch to the next display mode, press the MODE button.
ODO
The speed, temperature of the cooling liquid and the total kilometers or
miles traveled are shown in the ODO mode.
To switch to the next display mode, press the MODE button.
TRIP 1
The TRIP 1 mode shows the speed, the temperature of the cooling liquid
and the trip odometer 1.
To switch to the next display mode, press the MODE button.
TRIP 2
The TRIP 2 mode shows the speed, the temperature of the cooling liquid
and the trip odometer 2.
To switch to the next display mode, press the MODE button.
TRIP F
The TRIP F (fuel) mode shows the speed, the temperature of the cooling
liquid and the distance traveled since reaching the low-fuel mark (the low-
fuel indicator lamp will blink).
To return to the UHR mode, press the MODE button.