Table of Contents
Advertisement
TROUBLESHOOTING
TROUBLE
Engine overheats
FI lamp is blinking / lights up
Immobilizer indicator lamp lit con-
tinuously
Immobilizer indicator lamp blinks
quickly
Engine stalls while driving
High oil consumption
Headlight and position light fail
Flasher lights, brake light, horn
and combined instrument fail
Time is not displayed or not cor-
rectly displayed
»
CAUSE
Defect fan or thermoswitch for fan
Error in the injection system
Ignition key was locked due to
incorrect use of masterkey
Error in immobilizer
No fuel
Fuse for fuel pump has blown
Engine oil level too high
Engine oil too thin (viscosity)
Blown fuse
Blown fuse
Blown fuse, thus no continuous
power supply
REMEDY
Contact an authorized KTM workshop.
Contact an authorized KTM workshop
Program key (refer to Reordering and programming keys)
Identify the error from its blink code and remove it or con-
tact an authorized KTM workshop
Refuel
Replace fuse IGNITION/FUEL PUMP
Check engine oil level when the engine is warm; correct if
necessary
Use thicker engine oil; see chapter „Engine oil"
Replace fuse H/L BEAM POSITION.
Replace fuse HORN BRAKELIGHT SPEEDO.
Replace fuse ACC1/CLOCK
72
Advertisement
Table of Contents
