KTM 990 SUPERMOTO 2008 Owner's Manual page 10

»
OPERATION INSTRUMENTS
9
SPEED [1]
The speed can be displayed in kilometers per hour (km/h) or miles per hour (mph).
CHANGING THE SPEED DISPLAY FROM KM/H - MPH or MPH - KM/H
1
Switch on the ignition and press the MODE button more than 10 seconds in the ODO mode.
CLOCK [2]
The dots between the hours and minutes will blink in the CLOCK display.
The clock must be set if the battery was disconnected or if the fuse ACC1/CLOCK was blown.
SETTING THE CLOCK
Switch on the ignition and select the ODO mode. Press and hold the MODE button while
you press the SET button more than 1 second. The time will start to blink.
Use the MODE button to set the hours. Use the SET button to set the minutes.
Then press the MODE and SET buttons simultaneously.
2
AMBIENT TEMPERATURE [3]
The ambient temperature can be displayed in Celsius (°C) or Fahrenheit (°F).
CHANGING THE AMBIENT TEMPERATURE DISPLAY FROM °C - °F or °F - °C
Switch on the ignition and press the MODE button more than 10 seconds in the ambient
temperature mode.
Press the MODE button to go to the next display mode.
3