Related Manuals for Hoover DUST MANAGER
Summary of Contents for Hoover DUST MANAGER
- Page 1 DUST MANAGER GENERATION FUTURE USER INSTRUCTIONS 0565-5289.indd 1 28/11/2007 15:43:21...
-
Page 2: Important Safety Reminders
Hoover service engineer. Blue - NEUTRAL Genuine Hoover Spares and Consumables Brown - LIVE Always replace parts with Genuine Hoover spares and consumables. HOOVER SERVICE 08705 400 600 DUST MANAGER HOOVER SPARES 01204 556 111... - Page 3 Pet Hair and Allergen Remover* If any parts are missing Carpet Care Control Selector contact your retailer or call the Hoover helpline on 08705 400 600 * Feature may vary according to model - 3 - - 3 - 0565-5289.indd 3...
-
Page 4: Power Switch Setting
CARPET CARE CONTROL PREPARING TO USE YOUR CLEANER SELECTOR The carpet care control selector raises or lowers the Insert handle into body of cleaner. Slide into position. height of the nozzle. The nozzle height will not change Ensure handle is flush with body of cleaner. until the handle is released. -
Page 5: Cleaning Tools
CLEANING TOOLS* STAIR STABILISER* IMPORTANT: When using cleaning tools, the cleaner must be kept The Stair Stabiliser has been designed to improve cleaner stability when you in the upright (parked) position, particularly when cleaning stairs. pull on the hose while stair cleaning. It can be adjusted to suit any staircase. The carpet height selector should also be set to tool mode: Location Pet Hair &... - Page 6 RED vortex that the RED and BLUE finder. components are refitted. IMPORTANT: For optimum cleaning performance, always keep your filters clean. Hoover recommends to wash Dust Manager cassette filters after 5 container empties. - 6 - - 6 - 0565-5289.indd 6...
-
Page 7: Cleaning The Filters
CLEANING THE FILTERS* Washing pre-motor and exhaust filter: Washing filter and foam: The pre-motor filter should be washed every three Rotate the BLUE filter pack until the unlock months. position to release it from the dust container. The Carbon filter is normally maintenance free, this component should not be washed. -
Page 8: Clearing A Blockage
CLEARING A BLOCKAGE CHANGING BELT OR BRUSHES Refit brush assembly • Hold the brush assembly IMPORTANT: Switch the cleaner IMPORTANT: Switch cleaner off and and stretch the belt until remove plug from electricity supply off and remove the plug from the brush mountings slot down before checking the brushes or removing electricity supply before dismantling... -
Page 9: Guarantee Statement
ISO 9001. are met and are maintained To maintain your HOOVER product in peak condition you may also wish to take out a throughout the production life of Hoovercare policy, for which an annual payment provides a comprehensive maintenance and an appliance. - Page 10 8. Has the cleaner overheated? If so, it will take about 30 minutes to reset itself. If there is any doubt call the Hoover Service Office for advice. They may be able to assist you over the telephone. A service charge will be made if the cleaner is examined and found to be in working order, has not been assembled in accordance with these instructions or has been used incorrectly.
- Page 11 0565-5289.indd 11 28/11/2007 15:43:29...
- Page 12 GENERATION FUTURE Printed in P.R.C 0565 5289 0565-5289.indd 12 28/11/2007 15:43:29...