Table of Contents
Advertisement
LINE CorD SaFETY TIpS
1. NEVER pull or yank on the cord or the appliance.
2. To insert plug, grasp it firmly and guide it into the outlet.
3. To disconnect the appliance, grasp the plug and remove it from the outlet.
4. Before each use, inspect the line cord for cuts and/or abrasion marks. If any are
found, the appliance should be serviced and the line cord replaced. Please return it to
our Service Department or to an authorized service representative.
5. NEVER wrap the cord tightly around the appliance, as this could place undue stress
on the cord where it enters the appliance and could cause it to fray and break.
6. DO NOT operate appliance if the line cord shows any damage, if the appliance works
intermittently or stops working entirely.
7. DO NOT use an extension cord with this fan.
NoTE: Assembly of this fan will be easier if performed by two people.
1. Insert and twist Pole [A] clockwise in
the Base [B] until it is tight.
44809
aSSembly
[a]
[a]
[b]
2. Connect the Plugs coming from the
bottom of the Pole [a] and the Base [b].
[5]
[b]
04/03/2008
Advertisement
Table of Contents
