Attach Oven To Wall - Kenmore 721.86012 Installation Instructions Manual

ETEP 6:
A TTACH THE 0 VEN TO THE WALL
WARNING _k
You will need two people to lift this
microwave. Failure to use more
than one person could result in
personal injury.
1. Carefully lift microwave oven and hang it on
support tabs (See Figure 26) at the bottom of
the mounting plate. Reaching through upper
cabinet, thread power supply cord through the
power supply cord hole in the bottom of the
upper cabinet.
See Figure 30.
!l
power cord
Figure 30
power cord
hole
2. Rotate the microwave oven upward so the top
of oven is against the bottom of the upper
cabinet or cabinet frame.
3. Then insert a bolt down through each hole in the
upper cabinet bottom. See Figure 31.
Tighten the bolts until the gap between the
upper cabinet and microwave oven is closed.
4. If wall vented or room vented installation is
used, go to No. 7 on the next page.
Figure 31
17