Kenmore 25370124001 Installation Instructions Manual page 5

_J_ Extend Window Filler
_,Panels
1. Carefully raise window to expose filler panel
locking screws. Loosen screws so filler panels
slide easily.
2.
3.
4.
2, Extend panels to fir window opening
completely. Tighten locking screws on top.
3. Close window behind top angle.
Io
Install Window Lock
and Sash Seal
Trim sash seal to fit window width. Insert
into space between upper and lower sashes.
Install Chassis into
Cabinet and Install
Front to Unit
Lift chassis and carefully slide it into installed
cabinet.
Do not push on controls OR
finned coils. You could damage unit, or cur
hands.
Be sure chassis is firmly seated towards rear of
cabinet.
Refer to Owner's Guide for front instafiation.
SEAL
2. Attach right angle safety lock as shown.
(contined).
LOCK
head screw