Konica Minolta 8020 Instruction Manual page 64

1.6 Tiling Copies ("Image Repeat" Function)
7
Normally, the document
size is automatically
detected. However, if
you wish to specify the
document size, touch
[Size Input].
Select the document
size, and then touch
[Enter].
❍ To specify a photo
size or a non-
standard size, touch
[Size Input], and
then touch [Photo
Size or Custom
Size].
Select a photo size,
or touch [X] and [Y],
and use the keypad
to specify the size of
the original, and
then touch [Enter].
❍ For document sizes
in inch
measurements,
touch [Inch].
Select the desired
paper size, and then
touch [Enter].
8
In the Image Repeat screen, touch [Enter].
9
Specify any other necessary settings.
10
Press the [START] key.
Tip
To cancel the "Image Repeat" function, touch [Cancel] in the Image Repeat
screen.
Konica 8020/8031
1
1-33