ID Tech ValueScan II User Manual page 35

UPC-A
Read: Format
Leading
Check-sum transmission: By setting Enable, checks sum
will be transmitted.
Truncate leading/ending: The leading or ending digits of
barcode data characters can be truncated when these values
are set to non-zero. It will beep
when the truncate value is more than the barcode data digits
or the value of Truncate Leading is overlapped with that of
the Ending. The maximum value of truncate digits is 15.
Code ID setting: Code ID setting is a character used to
represent the symbol upon a successful read. A Code ID
setting is added to the transmitted data at the beginning or
end if this feature is selected. If you want the application to
transmit Code ID, you must set Code ID transmission to
Enable first. Refer to Code ID transmission.
Insertion group selection: The scanner offers one or two
insertion groups for one symbology. By setting one or two
digits to indicate which insertion group you want to insert.
You may refer to Character insertion.
Example: Group 2 → set 02 or 20.
Group 1 and 4 → set 14 or 41.
Data Digits
Zero (11 Digits)
Check
Digit
instead of reading anything
34