Unpacking And Getting Ready - Hitachi HIT BG17SS Instruction Booklet

Unpacking
This microwave oven is
designed for home use. It
should not be used for
commercial catering.
GB-4

Unpacking and getting ready

1
After unpacking your oven, check that it has not been damaged whilst in
the box. Make sure there are no dents, that the door closes properly.
A dented or damaged oven could allow microwave energy to escape.
Make sure that you have taken all the packaging from inside the oven.
2
Choose a flat work surface for your microwave away from heat sources
such as radiators or fires, and away from anywhere that is very cold.
Y ou should allow a 10cm space all around the oven and
30cm above so that warm air can escape from the
vents during cooking – it is not designed to be built in.
3
Plug your oven into a standard household electrical socket
(240 volt, 13 amp rated).
Avoid using a socket that also has an adaptor and other equipment
plugged in.
4
Put the turntable ring inside the oven and place the glass turntable on
top of the ring. The turntable is shaped to sit securely on the spindle.
Y ou must always use the turntable and ring whenever you use the
microwave.
30 cm
10 cm 10 cm