Hitachi CP-AW2519N Manual page 32

Operating
Selecting an input signal (continued)
Press COMPUTER button on the remote control.
1.
Each time you press the button, the projector switches its
input port from the current port as below.
COMPUTER IN1
USB TYPE B
● While ON is selected for AUTO SEARCH item in OPTION
menu, the projector will keep checking every port sequentially
till an input signal is detected (
pressed when VIDEO, S-VIDEO or HDMI port is selected, the
projector will check COMPUTER IN1 port first.
● It may take several seconds to project the images from the
USB TYPE B port.
Press VIDEO button on the remote control.
1.
Each time you press the button, the projector switches its
input port from the current port as below.
HDMI
VIDEO
● While ON is selected for AUTO SEARCH item in OPTION
menu, the projector will keep checking every port sequentially
till an input signal is detected (
pressed when COMPUTER IN1, COMPUTER IN2, LAN, USB
TYPE A or USB TYPE B port is selected, the projector will
check HDMI port first.
Press the MY SOURCE / DOC. CAMERA button on
1.
the remote control. The input signal will be changed
into the signal you set as MY SOURCE (
● This function also can use for document camera. Select the
input port that connected the document camera.
COMPUTER IN2
USB TYPE A
S-VIDEO
LAN
56). If COMPUTER button is
56). If VIDEO button is
60).
COMPUTER button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY PAGE VOLUME
FREEZE
UP
ON
DOWN
OFF
MY BUTTON
KEYSTONE MUTE
FOCUS D-ZOOM
VIDEO button
MY SOURCE/
VIDEO COMPUTER
DOC.CAMERA
ASPECT AUTO
SEARCH BLANK
MAGNIFY PAGE VOLUME
FREEZE UP
ON
DOWN
OFF
MY BUTTON
KEYSTONE MUTE
FOCUS D-ZOOM
MY SOURCE /
DOC. CAMERA button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY PAGE VOLUME
FREEZE
UP
ON
DOWN
OFF
MY BUTTON
KEYSTONE MUTE
FOCUS D-ZOOM
23