Preparing For The Remote Control; Preparing For The Interactive Pen - Hitachi CP-AW2519N Manual

Preparing for the remote control

Please insert the batteries into the remote control before using it. If the remote
control starts to malfunction, try to replace the batteries. If you will not use the
remote control for long period, remove the batteries from the remote control and
store them in a safe place.
1. Holding the hook part of the battery
cover, remove it.
Align and insert the two AA batteries
2.
(
HITACHI MAXELL or HITACHI MAXELL ENERGY, Part No. LR6 or R6P
according to their plus and minus terminals as indicated in the remote control.
Replace the battery cover in the direction of the arrow and snap it back into
3.
place.
WARNING ►For precautions on battery handling, refer to the next page.

Preparing for the interactive pen

Installing the battery
1.
Turn the battery cover of the pen to the left to open
it.
As illustrated in the diagram, insert the AAA battery
2.
into the battery cover with the - end facing the front.
(HITACHI MAXELL or HITACHI MAXELL ENERGY, Part No. LR03)
Attach the battery cover by turning it to the right
3.
until it is completely closed.
• Do not hold a battery with tweezers or the like.
WARNING ►For precautions on battery handling, refer to the next page.
Exchanging the tip of the pen
When the tip of the pen is shortened due to wearing,
exchange it according to the following procedure.
1.
Remove the tip of the pen referring to the
illustration.
Fit a new tip into the place and push it so that it
2.
clicks.
WARNING ►Keep the tip of the pen away from children and pets. Exercise
care to prevent them from swallowing the tip of the pen or the pack of spare
accidentally. If swallowed consult a physician immediately for emergency
treatment.
CAUTION ►Do not drop the pen or mishandle it.
1
16
3
2
)
The tip of
the pen