Access to tools *
Open the boot lid.
Lift the boot fl oor using its strap.
Fix it in the vertical position beyond the stops located on the boot
sides.
Remove the temporary puncture repair kit for access to the jack.
All of these tools are specifi c to your vehicle. Do not use them for
other purposes.
* According to country.
CHANGING A WIPER BLADE
BEFORE REMOVING A WIPER BLADE
Within one minute after switching off the ignition, operate the wiper
stalk to position the wiper blades in the centre of the windscreen.
REMOVING
Raise the corresponding wiper arm.
Unclip the wiper blade and remove it.
FITTING
Put the corresponding new wiper blade in place and clip it.
Fold down the wiper arm carefully.
AFTER FITTING A WIPER BLADE
Switch on the ignition.
Operate the wiper stalk again to park the wiper blades.