PEUGEOT RCZ Handbook page 159

2. Inflation
Turn the selector A to the "air" position.
Uncoil the black pipe H fully.
Connect the black pipe to the valve of the wheel.
Connect the compressor's electric plug to the vehicle's 12 V socket.
Start the vehicle again and leave the engine running.
Adjust the pressure using the compressor (to infl ate: switch B
in position "I" ; to defl ate: switch B in position "O" and press
button C ), in accordance with the vehicle's tyre pressure label
(located on the left hand door aperture).
A loss of pressure indicates that the puncture has not been fully
plugged; contact a PEUGEOT dealer or qualifi ed workshop for
assistance.
Remove and stow the kit.
Drive at reduced speed (50 mph [80 km/h] max) limiting the
distance travelled to approximately 120 miles (200 km).
Visit a PEUGEOT dealer or a qualifi ed workshop as soon as
possible.
You must inform the technician that you have used this kit.
After inspection, the technician will inform you whether the
tyre can be repaired or must be replaced.