Practical information
Battery
Procedure for charging your battery when it
is flat or for starting the engine using another
battery.
Access to the battery
The battery is located under the bonnet.
To gain access to it:
open the bonnet using the interior release
lever, then the exterior safety catch,
secure the bonnet stay,
remove the plastic cover on the (+)
terminal.
76
Starting using another battery
Connect the red cable to the positive
terminal (+) of the flat battery A, then to the
positive terminal (+) of the slave battery B.
Connect one end of the green or black
cable to the negative terminal (-) of the
slave battery B.
Connect the other end of the green or black
cable to the earth point C on your vehicle
(engine mounting).
Operate the starter, let the engine run.
Wait until the engine returns to idle and
disconnect the cables.