"Isofix" Mountings - PEUGEOT 107 Handbook

Child safety

"ISOFIX" mountings

Your vehicle has been approved in accordance
with the new ISOFIX regulation.
The seats * , represented below, are fitted with
regulation ISOFIX mountings:
62
These are three rings for each seat:
- two lower rings A , located between the
vehicle seat back and cushion, indicated by
a label,
- an upper ring B for securing the upper
strap, referred to as the TOP TETHER,
indicated by a marking on the rear seat
back panel.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
The ISOFIX child seats are fitted with two
latches which are secured easily on these
lower rings A.
Some also have an upper strap which is
attached to the upper ring B.
To attach this strap, raise the vehicle seat's
head restraint then pass the hook between its
rods. Then fix the hook on the upper ring B and
tighten the upper strap.
The incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
For information regarding the ISOFIX
child seats which can be installed
in your vehicle, refer to the table of
locations for ISOFIX child seats.
* Depending on version.