Removing The Wheel; Refitting The Wheel - PEUGEOT 107 Handbook

Practical information

Removing the wheel

1. Remove the trim.
2. Slacken the wheel bolts using the
wheelbrace 1.
* If your vehicle is fitted with alloy wheels, when tightening the bolts it is normal to notice that the
washers do not come into contact with the spare wheel. It is still fixed securely.
66
3. Place the jack 2 in contact with one of
the four locations A provided on the
underbody, the one closest to the wheel to
be changed.
4. Extend the jack 2 until its base is in contact
with the ground. Ensure that the centreline
of the jack base is directly below the
location A used.
5. Lift the vehicle.
6. Remove the bolts and detach the wheel.
Refi tting the wheel
1. Position the wheel.
2. Screw in the bolts fully by hand.
3. Pre-tighten the bolts * using the wheelbrace 1.
4. Fold the jack 2 and detach it.