5. Tighten the wheel bolts using the wheelbrace 1.
6. Refit the trim.
7.
Store the tools and the wheel in the boot.
Never go underneath a vehicle supported
only by a jack (use an axle stand).
The jack and the tool kit are specific to
your vehicle. Do not use them for other
purposes.
After changing a wheel:
-
have the tightness of the bolts and
the pressure of the spare wheel
checked as soon as possible,
-
have the punctured wheel repaired and
refit it on the vehicle as soon as possible.
Contact a PEUGEOT dealer or a
qualified workshop.
Changing a bulb
Front lamps
1.
Sidelamps
2. Direction indicators
3. Dipped beam / Main beam headlamps
Practical information
1. Sidelamps (W5 W)
Turn the bulb holder A one quarter of a turn
and remove it.
Remove the bulb and change it.
In certain climatic conditions (low
temperatures, humidity), the presence
of condensation on the internal
surface of the headlamps is normal ;
it disappears a few minutes after the
lighting is switched on.
9
67