Rear Seats - PEUGEOT 107 Handbook

Rear seats

Folding the backrest of the
bench seat
The seat backrest is folded from the rear of the
vehicle, with the boot open:
- check that the seat belt is positioned
correctly on the side of the seat back to
avoid damaging it,
- place the head restraints in the low position
(see "rear head restraints"),
- while folding the seat backrest, pull the
strap(s) A , located behind the seat back.
Returning the backrest of the
bench seat to its initial position
Push the backrest towards the rear and engage
it on mounting B .
Take care not to trap the seat belts, in
particular between the seat back and the
mounting B.
Check that the backrest has engaged correctly.
* Depending on version.
Rear head restraints *
The rear head restraints can be removed and
have two positions:
- high, position for use.
- low, storage position.
To raise the head restraint, pull it upwards.
To lower it, press lug A then the head restraint.
To remove it:
- tilt the seat back slightly,
- move the head restraint to the high
position,
- press lug A pulling the head restraint
upwards at the same time.
To refit it:
- tilt the seat back slightly,
- engage the rods of the head restraint in the
openings.
To reach the low position, press lug A.
Comfort
3
39