Connections; Before Connecting To The Projector; Connecting Example: Component In/S-Video In/Video In; Connecting Example: Hdmi In/Computer In - Panasonic PT-AE4000U Functional Instructions

Connections

Connections

Before connecting to the projector

Read and follow the operating and connecting instructions of each peripheral device.
The peripheral devices must be turned off.
Use cables that match each peripheral device to be connected.
Confirm the type of video signals. See "List of compatible signals" in "Technical Information" of the operating
instructions.
Audio cables must be connected from each peripheral device directly to the audio reproduction system.

Connecting example: COMPONENT IN/S-VIDEO IN/VIDEO IN

To COMPONENT
video output
DVD player

Connecting example: HDMI IN/COMPUTER IN

To HDMI output
Blu-ray player
NOTE:
• Make sure the HDMI cable is adapted to your HDMI device for proper performance.
• A compatible cable is required for an HDMI 1 080p signal.
• It is possible to connect with DVI devices via a HDMI/DVI conversion adapter, but some equipment may not project the
image properly or other problems could be encountered.
• Please tighten securely, fixing the screws on the connectors (D-SUB 15-pin) of the RGB signal cable.
• For more information about the serial terminals, see "Serial terminal" on page
E
8 - NGLISH
To VIDEO output
HDMI cable
(Commercial item)
Video player
Computer
42.
To S-VIDEO output
DVD player
RGB signal cable
(Commercial item)