Remote Control Operation; Operating Range; Managing The Lens Control Settings; Switching The Picture Mode - Panasonic PT-AE4000U Functional Instructions

Remote control operation

Operating range

Managing the lens control settings

You can adjust the focus and zoom of the
projected image, and save the settings.
Press the LENS button once to display the
LENS CONTROL menu.

Switching the picture mode

You can switch the preset picture mode settings
by pressing the PICTURE MODE button. Press
the button until the required setting is selected.
See "PICTURE MODE" on page 20.

Adjusting the image

You can display the PICTURE and ADVANCED
MENU menu items by pressing the PICTURE
ADJUSTMENT button. Press the button to
switch between PICTURE and ADVANCED
MENU menu.
Press ▲ ▼ to select the required menu item
and ◄ ► to adjust.
PICTURE menu items
Q
PICTURE MODE, CONTRAST, BRIGHTNESS,
COLOR, TINT, SHARPNESS, COLOR
TEMPERATURE and DYNAMIC IRIS
Remote control operation
You can operate the projector with the remote control
within the remote range of 7 m (22'11").
Facing to the projector
Q
Ensure the remote control emitter is facing the
remote control signal receptor on the front of
the projector and press the required buttons to
operate.
Facing to the screen
Q
Ensure the remote control emitter is facing the
screen and press the required buttons to operate
the projector. The signal will be reflected off the
screen. The operating range may differ due to the
screen material. This function may not be effective
with a translucent screen.
NOTE:
• Do not let strong light shine onto the signal receptor.
The remote control may malfunction under strong light
such as fluorescent light.
• If there are any obstacles between the remote control
and the remote control signal receptor, the remote
control may not operate correctly.
If you have saved Lens Memories, press the LENS
button twice to load the saved memories instantly. And
press the LENS button three times to go back to the
LENS CONTROL menu.
See "LENS CONTROL" on page 35.
NORMAL
DYNAMIC
COLOR1
COLOR2
ADVANCED MENU items
Q
GAMMA ADJUSTMENT, CONTRAST R/G/B,
BRIGHTNESS R/G/B, NR, MPEG NR,
FRAME CREATION, COLOR MANAGEMENT,
x.v.Color, DETAIL CLARITY, CINEMA REALITY,
TV-SYSTEM and RGB/YPbPr.
NOTE:
• For each menu item description, see "PICTURE menu"
on page 20.
• The screen will be cleared after 7 seconds without any
operation.
• The GAMMA setting is only available when the
GAMMA ADJUSTMENT is set to SIMPLE.
CINEMA3
CINEMA2
CINEMA1
E
NGLISH - 13