Trigger 1/2 Setting - Panasonic PT-AE4000U Functional Instructions

OPTION menu

TRIGGER 1/2 SETTING

You can set the input/output function for each TRIGGER
terminal.
There are 2 functions, INPUT and OUTPUT.
OUTPUT function
It is possible to control the external equipment
which have trigger terminals by transmitting the
trigger output signal.
INPUT function
It is possible to control the projector from external
equipment by receiving the trigger input signal.
PICTURE
POSITION
LANGUAGE
LENS CONTROL
FUNCTION BUTTON
VIERA LINK
OPTION
ENTER
SELECT
RETURN
1. Select TRIGGER 1 or TRIGGER 2 SETTING in
the OPTION menu and press the ENTER button.
OFF
OUTPUT
POWER ON
SELECT LENS MEMORY 1
SELECT LENS MEMORY 2
SELECT LENS MEMORY 3
SELECT LENS MEMORY 4
SELECT LENS MEMORY 5
SELECT LENS MEMORY 6
BLANK
DELAY TIME
INPUT
POWER ON/OFF
2. Press ▲ ▼ ◄ ► to select your required input/
output function and press the ENTER button.
E
40 - NGLISH
INPUT GUIDE DETAILED
OSD DESIGN TYPE1
OSD POSITION CENTER
BACK COLOR BLUE
STARTUP LOGO ON
AUTO SEARCH ON
HDMI SIGNAL LEVEL NORMAL
FRAME RESPONSE NORMAL
INSTALLATION FRONT/DESK
TRIGGER 1 SETTING OFF
TRIGGER 2 SETTING OFF
SLEEP OFF
HIGH ALTITUDE MODE OFF
LAMP POWER NORMAL
VIERA LINK SETTINGS
TEST PATTERN
LAMP RUNTIME 0H
SELECT 4:3 ASPECT
SELECT 16:9 ASPECT
SELECT S16:9 ASPECT
SELECT JUST ASPECT
SELECT ZOOM ASPECT
SELECT H-FIT ASPECT
SELECT V-FIT ASPECT
RS-232C COMMAND LINK
BLANK
OFF
Unable to transmit the trigger output signal.
It does not work even if trigger input signal is received.
(Enable to receive the trigger input signal)
OUTPUT
OPTIONS
POWER ON
SELECT LENS MEMORY 1
SELECT LENS MEMORY 2
SELECT LENS MEMORY 3
SELECT LENS MEMORY 4
SELECT LENS MEMORY 5
SELECT LENS MEMORY 6
BLANK
When the selected trigger item is chosen in the projector
menu, 12 V is outputted.
•
BLANK
When BLANK is activated, output is 12 V, but if the setting
is released, output is 0 V.
•
RS-232C COMMAND LINK
By receiving the command from external equipment, it
conforms and outputs 12 V.
•
When AUTO is selected in the ASPECT menu, it may
automatically select 4:3/16:9/ZOOM ASPECT depending
on the input signal. When this matches the aspect
selected in the trigger menu, 12 V is automatically output
from the trigger terminal, but if other aspects are selected,
output is 0 V.
INPUT
OPTIONS
POWER ON/OFF
•
POWER ON/OFF
If the trigger input signal from the external equipment is
changed from 0 V to 12 V, the projector power will be
switched on. And if it is changed from 12 V to 0 V, the
power will be switched off.
•
BLANK
If the trigger input signal from the external equipment is
changed from 0 V to 12 V, the screen will go blank. And if
it is changed from 12 V to 0 V, the BLANK setting will be
released.
SELECT 4:3 ASPECT*
SELECT 16:9 ASPECT
SELECT S16:9 ASPECT*
SELECT JUST ASPECT
SELECT ZOOM ASPECT*
SELECT H-FIT ASPECT
SELECT V-FIT ASPECT
RS-232C COMMAND LINK
BLANK