Advertisement
does not flash, check that the
other device is properly
connected to the DC-11 device.
If the light is not displayed,
charge the DC-11 device, and
press the power key to switch it
on.
If the DC-11 device cannot
start charging the other device
within about 30 seconds, the
DC-11 device switches off.
4. Check the charge level from the
connected device.
5. When the battery in the other
device becomes fully charged,
the indicator light stops
flashing and is continuously
shown for about 30 seconds,
and the DC-11 device switches
off. You can also stop charging
and switch off the DC-11
device by pressing and holding
the power key for about 5
6. Disconnect the DC-11 device
7. To carry the DC-11 device with
© 2008 Nokia. All rights reserved.
seconds. The DC-11 device
automatically switches off if it
becomes discharged.
When you charge the battery of
a low-power device such as a
Bluetooth headset, the
indicator light may continue
flashing even after the battery
has been fully charged.
from the other device.
you, insert the charging cable
into the side slot, and push the
charger plug into the recess.
5
Advertisement
