Advertisement
Get started
The DC-11 device contains the
following parts shown on the title
page: power key (1), indicator light
(2), 2.0 mm charger connector (3),
micro-USB charger plug (4), and
2.0 mm charger plug (5).
Before you can use the DC-11
device to charge the battery in a
compatible device, you must
charge the DC-11 device.
Charge the DC-11 device
Before charging the DC-11 device,
carefully read
"Battery and
charger
information".
When you disconnect the power
cord of any accessory, grasp and
pull the plug, not the cord.
1. Connect a compatible charger
2. Connect the charger cable to
© 2008 Nokia. All rights reserved.
Warning: Use only
chargers approved by
Nokia for use with this
particular model. The use
of any other types may
invalidate any approval or
warranty, and may be
dangerous.
to a power source.
the charger connector on the
DC-11 device. The device
switches on.
The indicator light flashes
during charging. If the light is
not displayed, check that the
3
Advertisement
