Thermador T36IB70CSS/01 Installation Instructions Manual page 16

Wood floor application
Use the (5 x 60 mm) and (4 x 15 mm) wooden screws
provided.
CI Drill pilot holes:
1/s" (3 mm)for the (5 x 60 mm) wooden screws
5/64" (2 mm) for the (4 x 1 5 mm) wooden screws
Being certain the screws penetrate through
the flooring and into the watt plate a minimum
of 3/4" (19 ram).
C3 Attach the anti tip bracket completely. Be sure
screws hold tight.
C3
a,
Clean hole or continue drilling additional depth.
b. c.
C3 Manually insert the screw into the walt plug until the
screw begins to resist.
CI Knock the watt plug and screw into the hote until the
screw head is approx. 1/2"(13 mm) from the anti tip
bracket.
I_] The distance D between the anti tip brackets is
adequately the width of the appliance.
Concrete floor applications
Always wear safety glasses and other necessary
protective devices or apparel when installing or
working with anchors risk of injury!
Not recommended for use in light weight masonry
material such as block or brick.
Not recommended for use in new concrete which has
not had time to cure.
Do not use core drills to drill holes for this anchor.
Use concrete anchor M8 and M8 stew. Additional use
the (5x60 mm) and (4x15 mm) wooden screws
provided.
CI Drill a 10 mm diameter hote any depth exceeding
the minimum embedment. Use the provided drill.
[_The distance D between the anti tip brackets is
adequately the width of the appliance.
16