American DJ Emerald Scan II User Instructions
  1. Manuals
  2. Brands
  3. American DJ Manuals
  4. Lighting Equipment
  5. Emerald Scan II
  6. User instructions
American DJ Emerald Scan II User Instructions

American DJ Emerald Scan II User Instructions

Dmx intelligent laser effect
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
User Instructions
Rev. 10/09
Emerald Scan II
Introduction:
Thank you for purchasing the American DJ
Scan II. The Emerald Scan II is a DMX intelligent, laser effect that cre-
ates multiple patterns. This unit can be used as a stand alone, sound-
active unit or in a Master/Slave configuration. The unit can also be
controlled via DMX controller. For a dramatic laser show use several
Emerald Scan II's together. This piece is best used with a fog or haze
machine to enhance the beam output.
Unpacking:
Every Emerald Scan II has been thoroughly tested and
has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping.
If the carton appears to be damaged, carefully inspect the unit for
any damage and be sure all accessories necessary to operate the unit
have arrived intact. In the event damage has been found or parts are
missing, please contact our toll free customer support number for fur-
ther instructions. Please do not return the unit to your dealer without
first contacting customer support.
Customer Support:
American DJ
support line, to provide set up help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.americandj.com for any com-
ments or suggestions. For service related issue please contact Ameri-
can DJ
. Service Hours are Monday through Friday 9:00 a.m. to 5:00
®
p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact American DJ customer support.
PLEASE recycle the shipping carton whenever possible.
American DJ
- www.americandj.com - Emerald Scan II Instruction Manual Page 2
©
®
General Introduction
Emerald
®
provides a toll free customer
®

Advertisement

Table of Contents
loading

Related Manuals for American DJ Emerald Scan II

Summary of Contents for American DJ Emerald Scan II

  • Page 1 Emerald ® Scan II. The Emerald Scan II is a DMX intelligent, laser effect that cre- ates multiple patterns. This unit can be used as a stand alone, sound- active unit or in a Master/Slave configuration. The unit can also be controlled via DMX controller.

  • Page 2: General Instructions

    Warranty Registration • This unit is intended for indoor use only, use of this product out- The Emerald Scan II carries a 90 day limited warranty. Please fill out doors voids all warranties. the enclosed warranty card to validate your purchase. All returned •...
  • Page 3 NON-INTERLOCKED HOUSING WARNING After setting up, and before public use, test laser to ensure proper The Emerald Scan II contains high power laser devices internally. Do function. Do not use if any defect is detected. Do not use if laser...

  • Page 4: Control And Functions

    DMX signal to another DMX fixture, or transmit a Master/Slave signal to the next Emerald Scan II in the chain. For best results in DMX or Master/Slave mode terminate this jack if it is the last unit in the chain.
  • Page 5 The Emerald Scan II is a five channel DMX unit. The DMX address gle controller, as long as all fixtures and the controller are DMX com- is set on the side panel of the Emerald Scan II. Your unit and your DMX pliant. To ensure proper DMX data transmission, when using several controller require a standard 3-pin XLR connector for data input and DMX fixtures try to use the shortest cable path possible.

  • Page 6: Operation

    This fixture is designed to operate as a stand Figure 3 alone, sound-active unit, or in a Master/Slave configuration. It can also operate via DMX controller. The Emerald Scan II is ready to be Special Note: Line Termination. When longer runs of cable are plugged in out of the box.
  • Page 7 The fuse holder has a built-in socket for a spare fuse be sure not to confuse the spare fuse with active fuse. American DJ - www.americandj.com - Emerald Scan II Instruction Manual Page 13 American DJ - www.americandj.com - Emerald Scan II Instruction Manual Page 14 ©...

  • Page 8: Specifications

    Specifications and improvements in the design of the product; if the product has been repaired or serviced by anyone other than the American DJ, Inc. factory unless prior written authorization was issued to purchaser by American DJ, Inc.; if the of this unit and this manual are subject to change without any product is damaged because not properly maintained as set forth in the instruction manual.

Table of Contents