American DJ EVENT BAR PRO User Instructions
American DJ EVENT BAR PRO User Instructions

American DJ EVENT BAR PRO User Instructions

Event bar pro

Advertisement

Quick Links

©2013 ADJ Products, LLC all rights reserved. Information,
specifications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
EVENT BAR PRO
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all affiliated companies hereby dis-
claim any and all liabilities for property, equipment, building,
and electrical damages, injuries to any persons, and direct or
indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a
result of the improper, unsafe, unsufficient and negligent as-
sembly, installation, rigging, and operation of this product.
User Instructions
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn off all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
3/14

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EVENT BAR PRO and is the answer not in the manual?

Questions and answers

Summary of Contents for American DJ EVENT BAR PRO

  • Page 1 ADJ Products, LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted. EVENT BAR PRO Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.
  • Page 2 DMX con- • Omega Bracket for Truss Mounting trolled. The Event Bar Pro can only be run as a stand alone unit or in • Built-In Mount for a lighting stand (Stand Sold Separately) Master-Slave configuration.
  • Page 3: Safety Precautions

    Data Cable (DMX Cable) Requirements (For DMX and Master/Slave tacles, and the point where they exit from the appliance. Operation): The Event Bar Pro has 5 DMX channel modes; 2 channel • Cleaning -The fixture should be cleaned only as recommended by mode, 17 channel mode, 20 channel mode, 22 channel mode, &...
  • Page 4 Installation Special Note: Line Termination. When longer runs of cable are The Event Bar Pro is fully operational in two different mounting posi- POWER POWER used, you may need to use a terminator on the last unit to avoid erratic tions, hanging upside-down from a ceiling or trussing, or attached to behavior.
  • Page 5: Dmx Address

    Master and then set the next fixture to “Slave 2”, the fixtures will now have contrast movement to each other. ADJ Produc s, LLC - www.adj.com - Event Bar Pro Instruction Manual Page 8 ADJ Produc s, LLC - www.adj.com - Event Bar Pro Instruction Manual Page 9...
  • Page 6 - In this mode the unit will run in sound unit will automatically go into Master Slave mode. ADJ Produc s, LLC - www.adj.com - Event Bar Pro Instruction Manual Page 10 ADJ Produc s, LLC - www.adj.com - Event Bar Pro Instruction Manual Page 11...
  • Page 7: Fixture Time

    “Inverse” is displayed, press ENTER to confim. To deacti- vate Pan inversion, select “Normal” and press Enter. ADJ Produc s, LLC - www.adj.com - Event Bar Pro Instruction Manual Page 12 ADJ Produc s, LLC - www.adj.com - Event Bar Pro Instruction Manual Page 13...
  • Page 8: Master/Slave Configuration

    Elation® universal DMX-512 controller to create unique programs tai- lored to your individual needs. 1. The Event Bar Pro has five different DMX channel modes. To set the DMX channel mode see page 9. See pages 16-21 for the DMX modes & traits.
  • Page 9 Show Speed. When the Channel 1 value is 255, Channel 2 will control the sound sensitivity. ADJ Produc s, LLC - www.adj.com - Event Bar Pro Instruction Manual Page 16 ADJ Produc s, LLC - www.adj.com - Event Bar Pro Instruction Manual Page 17...
  • Page 10 OPEN 1 - 5 RESET 6 - 255 STROBING SLOW - FAST ADJ Produc s, LLC - www.adj.com - Event Bar Pro Instruction Manual Page 18 ADJ Produc s, LLCs - www.adj.com - Event Bar Pro Instruction Manual Page 19...
  • Page 11 218 - 247 SHOW 8 248 - 254 RANDOM SHOW SOUND ACTIVE ADJ Produc s, LLCs - www.adj.com - Event Bar Pro Instruction Manual Page 20 ADJ Produc s, LLCs - www.adj.com - Event Bar Pro Instruction Manual Page 21...
  • Page 12: Photometric Chart

    INNO ROLL HP tures. DO NOT mix fixtures. INNO SCAN HP ADJ Produc s, LLCs - www.adj.com - Event Bar Pro Instruction Manual Page 22 ADJ Produc s, LLCs - www.adj.com - Event Bar Pro Instruction Manual Page 23 Distance(m)
  • Page 13: Warranty

    1-year (365 day Limited Warranty) and batteries which have a 180 day limited warranty). ADJ Produc s, LLCs - www.adj.com - Event Bar Pro Instruction Manual Page 24 ADJ Produc s, LLCs - www.adj.com - Event Bar Pro Instruction Manual Page 25...
  • Page 14: Specifications

    A.D.J. Supply Europe B.V. Junostraat 2 6468 EW Kerkrade Netherlands service@adjgroup.eu / www.adj.eu Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99 ADJ Produc s, LLCs - www.adj.com - Event Bar Pro Instruction Manual Page 26...

Table of Contents