Operation - American DJ Fusion Scan 250 EX User Instructions

Fusion Scan 250 EX™
of the unit.
1. Tap the MENU button until "FHRS" is displayed, press
ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
VER
- With this function you can display the version soft-
ware of the unit.
1. Tap the MENU button until "VER" is displayed, press ENTER.
2. The display will now display the version of software. Press
MENU to exit.
RSET
- Use this function to reset the unit.
1. Tap the MENU button until "RSET" is displayed, press ENTER.
2. The fixture will now reset.
American DJ - www.americandj.com - Fusion Scan 250 EX™ Instruction Manual Page 13
®
System Menu Fusion Scan 250 EX™
CAUTION IMPORTANT! When installing this projector, make sure
that it is mounted in a manner that prevents the audience from
looking directly into the beam, and the beam from striking the
audience.
Universal DMX Control:
universal DMX-512 controller to control mirror movement, the pat-
terns and chases, and the shutter (strobe). A DMX controller allows
you to create unique programs tailored to your individual needs.
1. The Fusion Scan 250 EX™ uses six DMX channels. See pages
16-17 for detailed description of the DMX traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 8-10 as well as the set-up specifications that are
included with your DMX controller.
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instruction on page 11 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Stand-Alone Operation (Sound Active Mode):
a single unit or several units linked together, to run to the beat of the
music.
1. Once you plug the fixture in, Sound Active mode is activated auto
matically
on the top of the fixture.
2. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout.
Master-Slave Operation (Sound Active):
you to link up to 16 units together and operate without a controller. The
units will be sound activated. In Master-Slave operation one unit will
act as the controlling unit and the others will react to the controlling
units programs. Any unit can act as a Master or as a Slave.
1. Using standard XLR microphone cables, daisy chain your units
together via the XLR connector on the rear of the units. Remem-
ber the Male XLR connector is the input and the Female XLR
American DJ
This function allows you to use a Elation
. You can adjust the sensitivity by turning the knob
- www.americandj.com - Fusion Scan 250 EX™ Instruction Manual Page 14
®

Operation

®
This mode allows
This function will allow