American DJ Fusion Scan 250 EX User Instructions page 6

Fusion Scan 250 EX™
Note: After making any adjustments in the operating
system, there is a 10 second delay.
ADDR -
DMX Address Setting.
1. Tap the MENU, UP, or DOWN buttons until "ADDR" is dis-
played, press ENTER.
2. A number between 1-512 will be displayed and flashing.
Press the UP or DOWN buttons to find your desired address.
Press ENTER to set your desired DMX address.
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Tap the MENU button until "SLND" is displayed, press
ENTER. "MSTR", "SL 1" or "SL 2" will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim and exit.
BLND -
Blackout or Stand by mode.
1. Tap the MENU button until "BLND" is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until Yes is
displayed, press ENTER to confim and exit. The fixture will now
be in Blackout mode. To deactivate Blackout mode, select No
and press Enter.
I PAN -
Pan Inversion
1. Tap the MENU button until "I PAN" is displayed, press ENTER.
Either NO or 1 will be displayed.
2. To activate the Pan inversion tap the UP or DOWN buttons
until I is displayed, press ENTER to confim and exit. To deacti-
American DJ - www.americandj.com - Fusion Scan 250 EX™ Instruction Manual Page 11
®
System Menu Fusion Scan 250 EX™
vate Pan inversion, select No and press Enter.
I TLT -
1. Tap the MENU button until "I TLT" is displayed, press ENTER.
Either NO or 1 will be displayed.
2. To activate the Tilt inversion tap the UP or DOWN buttons
until I is displayed, press ENTER to confim and exit. To deacti-
vate Tilt inversion, select No and press Enter.
LED -
turn off after 10 seconds.
1. Tap the MENU button until "LED" is displayed, press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to keep the LED display on at
all times, or "OFF" to switch to have the LED display switch off
after 10 seconds.
3. Press ENTER to confirm and exit.
I DSP -
1. Tap the MENU button until "I DSP" is displayed, press ENTER.
2. Press ENTER to "flip" the display. Press ENTER to "flip" it
again. To save the adjustment press any other button.
TEST
test program will test pan/tilt mirror movement, laser, and
colors.
1. Tap the MENU button until "TEST" is displayed, press ENTER.
2. The fixture will now run a self test.
FHRS
American DJ
Tilt Inversion
With this function you can have the LED display
This function will reverse the display 180º.
- This function will run a self test program. The
- With this function you can display the running time
- www.americandj.com - Fusion Scan 250 EX™ Instruction Manual Page 12
®
System Menu