Table of Contents
Advertisement
,
cabinets
33"
above rangetop
or line "B"
for
cabinets 30" above rangetop.(See
figure 13).
DOTTED
CUT
Figure 13
Separate carton into parts "X", "Y" and "Z". Tape
bottom flaps of section "X" (See figure 14.)
5,
Remove the front grill from oven by removing the
three screws. (See figure 16.)
NOTE: Save grill and screws for re-installation
Figure 16
6.
Nest oven on carton part "Y"
in V cut of carton
part "X" so that back of oven is facing out. (See
figure 17.)
CAUTION:
Make sure the door handle, fan switch
knobs and light switch do not hit carton when setting
oven on carton. NOTE: Carton may be unstable.
,
Figure 14
Place carton part "Y" into V cut of carton part "X",
(See figure 15.)
Figure 15
=
Figure 17
Remove back support by rotating with a flat blade
screwdriver the two (2) rod fasteners a quarter turn
counter clockwise until slots in rods are vertical.
Slots for turning rod fasteners are the rods located
in the two upper corners in front of the oven. (See
figure 18.)
ROD
BACK
FASTENERS
SUPPORT
Figure 18
- Quick Links:
- Installing the Oven
Hide quick links:
Advertisement
Table of Contents
