Whirlpool MH6300XM0 Installation Instructions Manual page 10

7. Secure excess power cord to back or side of
cabinet with tie wraps and #8 x 3/8" hex head
screws. (See figure 27)
CAUTION: BE SURE ALL SCREWS AND BOLTS ARE
TIGHTENED.
C,
side metal clips. Snap into place. Bring front edge
of light lens up to front edge of oven and push
sharply upward all along the front edge of the lens
to snap into the front clips. (See figure 30.)
Install filter by fitting the filter's front edge into the
channel along with back of the light lens. Push
back edge of filter up into back of opening and pull
out the two mounting clips to secure the filter.
8. Replace front grill with three (3) screws. (See figure
28).
MOUNTING
CLIPS
Figure 30
Figure 28
°
A.
Insert light bulb, light lens and vent filter.
Place lamp prongs into each socket and roll the
lamp toward the front of the oven until it stops. (See
figure 29).
Figure 29
B. Install light lens by fitting the second ridge from
the back edge of the lens into each of the two back
10