Table of Contents
Advertisement
QuickSpecs
Options
ProLiant 6400R Unique Options
Processor
DA-10047
Division — Version 21 — December 11, 2000
Compaq Hot Plug Redundant System Fan Option Kit
When upgrading earlier versions of the Pentium III Xeon 500 MHz models (those
shipped prior to and during Q1,00 and equipped with a single, hot plug rear fan) to use
Pentium III Xeon 550 MHz processors, you are required to install the Hot Plug
Redundant System Fan Kit (P/N 157984-B21) to ensure proper operation of your
system. Install the fan kit prior to or at the time of upgrading the processors in order to
protect your server from the demanding thermal environment created by the increasing
power of the newest processor technology. Failure to purchase and install this option kit
may void the warranty or potentially damage the server. In addition to ensuring the
proper operation of your server, installation of the kit provides the added benefit of
providing fan redundancy across all the major subsystem components ( I/O, memory,
and CPUs) of your server.
Compaq Hot Plug Redundant Power Supply Option Kit (U.S.)
(The Compaq ProLiant 6400R ships standard with one hot plug power supply in bay
one. For redundancy, a purchase of one Compaq Hot Plug Redundant Power Supply
Option Kit (105739-xx1) is required and can be installed in bay two.)
Compaq Hot Plug Redundant Power Supply Option Kit (Australia)
(The Compaq ProLiant 6400R ships standard with one hot plug power supply in bay
one. For redundancy, a purchase of one Compaq Hot Plug Redundant Power Supply
Option Kit (105739-xx1) is required and can be installed in bay two.)
Compaq Hot Plug Redundant Power Supply Option Kit (Int'l)
(The Compaq ProLiant 6400R ships standard with one hot plug power supply in bay
one. For redundancy, a purchase of one Compaq Hot Plug Redundant Power Supply
Option Kit (105739-xx1) is required and can be installed in bay two.)
Compaq Hot Plug Redundant Power Supply Option Kit (Japan)
(The Compaq ProLiant 6400R ships standard with one hot plug power supply in bay
one. For redundancy, a purchase of one Compaq Hot Plug Redundant Power Supply
Option Kit (105739-xx1) is required and can be installed in bay two.)
Compaq Redundant Power Processor Module Option Kit
Compaq High Voltage PDU Right Angled Cable Kit (IEC14)
(For use with Compaq High-Voltage PDUs, this is a 15-Amp power cord with a right
angle connector on the side that plugs into the ProLiant 6400R server. The right angle
connection at the server improves cable management at the rear of the server.)
Non-redundant power processor module
Pentium III Xeon 6/550 2-MB Processor Option Kit
Note: This processor option kit (PN 155224-B21) supports the ProLiant 6400R
and ProLiant 5500 servers.
Pentium III Xeon 6/550 1-MB Processor Option Kit
Note: This processor option kit (PN 155223-B21) supports the ProLiant 6400R
and ProLiant 5500 servers.
Pentium III Xeon 6/550 512K Processor Option Kit
Note: This processor option kit (PN 155222-B21) supports the ProLiant 6400R
and ProLiant 5500 servers
Pentium III Xeon 6/500 2-MB Processor Option Kit
Note: This processor option kit (PN 117812-B21) supports the ProLiant 6400R
and ProLiant 5500 servers.
Pentium III Xeon 6/500 1-MB Processor Option Kit
Note: This processor option kit (PN 117811-B21) supports the ProLiant 6400R
and ProLiant 5500 servers.
Pentium III Xeon 6/500 512K Processor Option Kit
Note: This processor option kit (PN 117810-B21) supports the ProLiant 6400R
and ProLiant 5500 servers.
Compaq ProLiant 6400R
Pentium III Xeon
157984-B21
105739-001
105739-011
105739-021
105739-291
105738-B21
142257-005
155224-B21
155223-B21
155222-B21
117812-B21
117811-B21
117810-B21
7
Advertisement
Table of Contents
