Wash Cycle And Sound - Haier XQJ100-96 User Manual

Wash Cycle and sound

How to choose washing cycle and washing time
Follows will help you to choose the right washing cycle for the fabrics you are washing.
Every cycle is set according to the type and soil degree of the fabrics.
There is pause step in every cycle, it is normal if it happens during washing.
Saturated soak(20 minutes): use this option for the heavy-soiled fabrics, for every 3
minutes interval, the fabrics will be agitated 1 minute. In order to improve the cleaning,
please use 2 times the amount of recommended detergent(Soak time can be selected
according to your need).
REGULAR cycle
REGULAR cycle is used for normal soiled fabrics, this cycle combine the high-speed washing
and short high-speed spin. This cycle is mainly used for cottons and linens, you can choose
the washing time according to the soil degree of the fabrics, 6 minutes for light-soiled fabric,
12 minutes for heavy-soiled fabrics.
PERM PRESS cycle
This cycle is one kind of the delicate cycle, which rinse 2 times, the cold water wash can be
used to prevent the fabrics from wrinkling. This cycle is for heavy-duty fabrics or synthetics.
You can choose washing time according to the soil degree of the fabrics.
DELICATES cycle
This cycle can use low speed wash action to remove the soil, the low speed spin can prevent
the fabrics from wrinkling. For light soiled delicate fabrics, use this cycle.
HAND WASHABLE cycle
This cycle, low speed wash 20s in every internal of about 20s, this cycle is suitable for the
fabrics needed special care. The low speed spin can prevent the fabrics from wrinkling.
Rinse and spin
In all above cycles, PERM PRESS cycle rinses 2 times , and other cycle rinses 1 times. It is
necessary of additional rinsing when washing heavy-soiled fabrics with superfluous
detergent or special care fabrics.
When the cycle is completed, If you want to rinse once more, push in the button and turn
the knob in clock wise direction to "rinse " in "NORMAL" cycle(drain-spin-fill-rinse-drain-spin).
Spin
If you need separate drain and spin, you can operate as follows:
Push in the button and turn the knob to the "spin " in "NORMAL" cycle.
Pull out the knob, the washing machine start to drain then spin.
Sounds during operation of washing machine
The following sounds shall be the normal sounds of washing machine in operation:
Wash cycle
If the low water level is selected for washing a small amount of laundry, you may hear "kada"
sound from agitator due to the lower water level in washtub, this is normal washing sound.
Draining stage
The draining speed of washing machine is dependent on the installation of it. When the water
is quickly drained out from the washing machine, you hear the sound of drawing of the air to
the drain pump. This phenomenon may appear in the final draining stage.
After draining and before spinning
When the wash cycle turns from draining to spinning, the sound of gear meshing and puller
opening may be heard.