Using The Camera To Dub Files From A; Vcr/Dvd Player - JVC GZ-MG730 Manual Book

Using the Camera to Dub Files from
a VCR/DVD Player
Preparation:
•
Set [SWITCH TO ANALOGUE I/O] to [I/O].
(p. 65)
•
Turn off all units.
AV Jack
DC Jack
To AC
Outlet

VCR/DVD Player

AV Output Jack
You can also connect the cables using the
jacks on the Everio dock connectors.
The S-Video cable (optional) enables even
higher quality dubbing. (p. 10)
When other devices such as a DVD burner
are connected to the Everio dock, turn the
power of these devices off.
AC Adapter
AV Cable
1
Start playback on the VCR/DVD
player.
2
Press the START/STOP button on the
camera at the scene where you want
to start recording.
L
To stop recording
Press the START/STOP button again.
NOTES
•
If "COPY PROTECTED CONTENT"
appears, the file is protected and cannot be
recorded.
•
If the videos you want to record contain both
16:9 and 4:3 screen size, recording stops
where the aspect ratio switches. To record
such videos, you need to perform recording
operation at every switching point.