Changing The Event Registration Of Video Files After Recording - JVC GZ-MG730 Manual Book

Histogram
A histogram is a graph indicating the image's
brightness.
By checking the image and its histogram, you
can see the exposure level pattern and the
overall tone reproduction.
Press the INFO button twice.
DIRECT
BACK UP
INFO
•
A larger number of pixels in the centre
position indicates correct exposure and well-
balanced brightness.
D Brightness level
(Dim)
•
The shutter speed, F-number and ISO
sensitivity (GAIN) when recorded are also
displayed.
L
To turn off the file information display
Press the INFO button again.
NOTE
The shutter speed displayed during shooting
in auto mode is an approximation. It may not
match the one displayed with the histogram.
#
1/250 s
F3.5
ISO100 D B
B
(Bright)
Changing the Event Registration
of Video Files after Recording
Preparation:
•
Slide the mode switch to select
•
Press the SELECT PLAY/REC button to
select playback mode.
1
Touch the MENU button.
2
Select [CHANGE EVENT REG.].
Changing the Event of the Currently
Displayed File
3
Select [CURRENT].
4
Select the file you want to register.
You can select the previous or next file by
{ }
selecting or
Continued on next page
!
mode.
EDITED COPY
CHANGE EVENT REG.
EDIT PLAYLIST
EFFECT
CHANGE REGISTERED EVENT
CHANGE EVENT REG.
CURRENT
FILE SELECT
SELECT FILES ONE BY ONE
QUIT
CHANGE EVENT?
YES
NO
.
!