Advertisement
Quick Links
4in. ANGLE GRINDER
OPERATING INSTRUCTIONS
SPECIFICATIONS – ITEM# 151604
Disc Diameter:
Disc Bore Diameter:
No Load Speed:
Input Power:
Spindle Lock
Quick Change
Guard
ALWAYS WEAR EYE, FACE & EAR PROTECTION
Distributed by Northern Tool & Equipment Co., Inc.
Made in China
4in.
5/8in.
11,000 max. RPM
500W
On-Off Switch
Disc
Burnsville, MN 55306-6936
Brush
2-Position
Handle
NorthenTool.com
Advertisement
Related Manuals for Wel-Bilt 151604
Summary of Contents for Wel-Bilt 151604
-
Page 1: Operating Instructions
4in. ANGLE GRINDER OPERATING INSTRUCTIONS SPECIFICATIONS – ITEM# 151604 Disc Diameter: 4in. Disc Bore Diameter: 5/8in. No Load Speed: 11,000 max. RPM Input Power: 500W On-Off Switch Brush Spindle Lock Quick Change Guard 2-Position Handle Disc ALWAYS WEAR EYE, FACE & EAR PROTECTION Distributed by Northern Tool &... -
Page 2: General Use
GENERAL USE The 4in. (100mm) angle grinder is designed to grind When grinding do not force the grinder as no more all types of material and has been designed for DIY force than the weight of the grinder itself should be (Do It Yourself) and hobbyist purposes. - Page 3 ASSEMBLY AND INSTRUCTIONS WARNING! BE SURE TO DISCONNECT THE • Insert the grinding disc onto the angle grinder spindle ANGLE GRINDER FROM THE POWER SUPPLY with the disc label facing the angle grinder. The hole BEFORE ATTACHING OR REMOVING THE DISC OR in the disc should be located onto the spindle.
- Page 4 6 MONTH REPLACEMENT WARRANTY Your Wel-Bilt tool is covered by a 6 month replacement *Warranty excludes consumable parts such as brushes, warranty from the date of purchase. Industrial or high batteries, sanding pads, blades, discs and drill bits.