Brother PT-9700PC User Manual page 40

Note
It is possible to scan multiple settings.
●
If no settings have been specified, a label
●
will be printed with the default P-touch
Template Setting (Single copy with "Auto
cut on" and "Half cut on"). For details on
P-touch Template Settings, download
"P-touch Template manual" (English only)
from the following web site:
http://solutions.brother.com/
Choose your region (eg. Europe), your
country, your model and Downloads for
your model.
To specify the number of copies to be
●
printed, scan the "Number of copies"
bar code, and then scan the bar codes
under "For entering numbers" to specify
a three-digit number. The setting is
automatically applied when three digits
have been specified.
Example:
Specify numbers by scanning bar codes
as follows: 7 → [00][7], 15 → [0][1][5].
To change the setting for the number of
●
copies, scan the "Number of copies" bar
code again, and then scan the bar codes
for the new three-digit number.
Scan the "Select template" bar code,
6
and then scan the bar codes under
"For entering numbers" to specify the
"Key Assign" number (three digits)
for the bar code template.
Note
The setting is automatically applied
●
when three digits have been specified.
Example:
Specify numbers by scanning bar codes
as follows: 7 → [00][7], 15 → [0][1][5].
To change the number, scan the "Select
●
template" bar code again, and then scan
the bar codes for the new three-digit
number.
Scan the key bar code whose data is
7
to be used in the database file.
Scan the "Delimiter" bar code.
8
Scan the "Begin printing" bar code.
9
The object data in the specified
0
template is replaced with the database
data, and the labels are printed.
ABC Company
Planning
Walter Freeman
8766
39