Brother PT-9700PC User Manual page 47

Problem
I do not understand how to install the
second printer that I have purchased.
I do not understand how to share
a printer on a network (PT-9800PCN
only).
46
• With a USB connection.
When the printer is connected to the computer using
a USB cable, the driver for the second printer is
automatically installed through Plug and Play.
• With a Peer-to-Peer connection (PT-9800PCN only).
- If one PT-9800PCN is already installed:
After the second printer is connected to the LAN, the
installer starts up and the printer driver is installed. Both
printers are listed in the dialog box where the printer can
be selected. Identify the second printer by its IP address,
and then select it. The selected printer driver is registered
with the computer.
- If multiple printers are to be installed at the same time:
When the printers are connected to the LAN, the installer
starts up and the printer drivers are installed. If multiple
printers are selected in the list appearing in the dialog box
where printers are selected, the selected printer drivers
are registered with the computer.
See the "Network User's Guide" (PDF).
Solution