Advertisement
QuickSpecs
Related Options
HP Power Cords
Sidewall Panel Kits
Rack Stabilization Kits
HP Rack Cable Trays
Rack Coupling Kit
HP Care Pack Services
HP IEC320-C14 to C13 10A/4.5ft/1.37m/ 15 PDU Cable
HP IEC320-C14 to C13 (10A/4.5ft/1.37m) PDU Cable
10A, IEC320 C-14 to IEC320 C-13 Cables, 1.6ft (0.5m), single pack
HP 1xC19-C120 16A 2.5m Cable
HP 2m 16A C19-C20 Redundant Jumper Cord
HP 1.2m 16A C19-C20 Redundant Jumper Cord
NOTE: For more information on HP power cords please go to:
http://h18004.www1.hp.com/products/servers/proliantstorage/power-
protection/options/power-cable.html
HP 10642 G2 Side Panel
NOTE: The lightweight, locking side panels for the G2 Series racks come in 3 sections for
better handling. Side panels are included with the 22U and 14U racks.
HP 600mm JackBlack Rack Stabilizer Kit
NOTE: The anti-tip stabilizer kits provide stability and support when equipment is
installed, removed or accessed within the rack. Heavy Duty stabilizer kits should be
used when a single racked component exceeds 200 lbs.
HP 10K G2 600W Graphite Stabilizer Kit
HP 600 Wide Rack Top Cable Tray
HP Rack Top Cable Mgmt Transfer Tray
NOTE: The Aisle Transfer bridge allows for cabling trays to be connected even across
different aisles in the datacenter.
NOTE: These kits mount on the top of the 9000 and 10000 Series rack (except the
S10614 rack). Kit color is graphite.
10000 Rack Coupling Kit
NOTE: Supported by both the Rack 10000 and Rack 10000 G2 series. Supports 24 in and
600 mm floor tile spacing. The kit is used to join two or more 10000 series racks of the
same height together in minutes to create a multi-bay configuration.
NOTE: for a complete list of all HP 10000 G2 Series rack option please go to
www.hp.com/go/rackandpower
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
Hardware Installation (Electronic)
NOTE: Covers field installation of an additional RP12000/3 UPS module into an existing
RP36000/3. The RP36000/3 must be installed by a qualified electrical contractor. One
U4696E Service must be purchased for each additional RP12000/3 UPS Expansion
module to be installed.
NOTE: Additional Care Packs are available.
NOTE: The UPS batteries, power bus bar, and wire tray components are covered by a 3
year parts warranty only.
DA - 12856 Worldwide — Version 9 — June 25, 2012
HP Parallel 3 Phase Uninterruptible Power Systems
142257-007
142257-006
142257-B28
295633-B22
AF574A
AF575A
AF054A
BW932A
383982-B21
383984-B21
248929-B21
UH804E
UH805E
UH806E
U4696E
Page 9
Advertisement
