HP xw6400 Quickspecs page 35

QuickSpecs
Technical Specifications
Over-Temp Warning on
Screen (Requires IM
Agents)
OS CD (Restore OS CD)
Restore CD
Flash ROM
3.3V Aux Power LED on
System PCA
Dual Function 5V Aux
Power LED (ON)/PS_ON
LED (OFF) on System PCA
Diagnostic Power Switch
LED on board
Clear Password Jumper
Clear CMOS Button
CMOS Battery Holder for
easy Replacement
Processor ZIF Socket for
easy Upgrade
DIMM Connectors for easy
Upgrade
NIC LEDs (integrated)
(Green & Amber)
ASF 1.0 support (Alert
Standard Format)
Dual function front power
switch
Security Features
1l2 Trusted Platform
Module Chip with optional
ProtectTools Software
Access Panel Key Lock
(standard)
Padlock (optional)
Kensington Cable Lock
(optional)
HP Solenoid Hood
Lock/Sensor Kit (optional)
Universal chassis clamp
lock (optional)
Restores computer to its original factory shipping image; No recovery CDs will ship with Linux - an ISO
Restores the computer to its original factory shipping image
Industry-standard specification for network alerting in operating system-absent environments
Enables layered security management
Prevents removal of the access panel and all internal components including optical and floppy drives
Prevents entire system theft and discourages access panel removal. 7mm diameter padlock loop at rear of
system.
May prevent entire system theft; Kensington locks to tether systems to the desk. 3mm x 7mm slot at rear
of system.
The Solenoid Hood Lock eliminates the need for a physical key by making the chassis lockable through
software and a password. You can also lock and unlock the chassis remotely over the network. The Sensor
Kit detects when the access panel has been removed.
The version without a cable discourages access panel removal and prevents theft of IO devices. The
version with a cable additionally prevents entire system theft and allows multiple systems to be secured
with a single cable.
DA - 12505 North America — Version 27 — January 7, 2008
Yes
image will be available on an HD partition.
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Used to determine NIC status
Also acts as a reset switch when held for 4 seconds
HP xw6400 Workstation
Page 35