Washing Sequence - Haier XPB60-113S User Manual

Washing sequence

Wash timer
Wash selector
(To set to below 2 minute,
(Strong current,
first set to 5 minute then
standard current)
turn it back. it can increase
the service life of the timer).
OFF STRONG
STANDARD
WASH SELECTOR
WASH TIMER
Wash
1.Water-filling selector
(1) Set the water-filling selector at the "WASH" side.
(Figure 1)
(2) Set the water level adjusting lever to needed line.
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.
3.Put in the laundries. If the water quantity is
insufficient, please add water.
4.Select the current.
Select the strength of the current according to
the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the
laundries. (Figure 4)
6.After washing, the buzzer will ring. Set the "WASH
SELECTOR" at "DRAIN". (Figure 5).
Water-filling entrance
(The buzzer will ring when
the washing finishes)
OFF
MAX
DRAIN
BUZZER
9
Water-filling selector handle
Overfilling sign
Spin timer
Buzzer
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
OFF
SPIN TIMER
WASH SPIN
Figure 1
STRONG
STANDARD
DRAIN
WASH SELECTOR
Figure 3
OFF
WASH TIMER
Figure 4
STRONG
STANDARD
DRAIN
WASH SELECTOR
Figure 5
Figure 2