Ford 2004 Econoline Owner's Manual page 16

Instrument Cluster
Odometer: Registers the total miles
(kilometers) of the vehicle.
Trip odometer: Registers the miles
(kilometers) of individual journeys.
Press the SELECT/RESET control
once to switch from the odometer to
the trip odometer. Press the control
again to select Trip A and Trip B features. To reset the trip, press and
hold the control again until the trip reading is 0.0 miles.
Tachometer: Indicates the engine
speed in revolutions per minute.
Driving with your tachometer
pointer continuously at the top of
the scale may damage the engine.
Battery voltage gauge: Indicates
the battery voltage when the
ignition is in the ON position. If the
pointer moves and stays outside the
normal operating range, have the
vehicle's electrical system checked
as soon as possible.
Engine oil pressure gauge:
Indicates engine oil pressure. The
H
needle should stay in the normal
operating range (between "L" and
"H"). If the needle falls below the L
normal range, stop the vehicle, turn
off the engine and check the engine
oil level. Add oil if needed. If the oil level is correct, have your vehicle
checked at your dealership or by a qualified technician.
16
2004 Econoline (eco)
Owners Guide (post-2002-fmt)
USA English (fus)