Ford Kuga Owner's Manual page 89

Programming the functions Program 1
and Program 2
Program 1
[07:55]
Monday
Tuesday
Wednesday
Thursday
Friday
E74468
1. Use the rotary control to enter the main
menu.
2. Highlight Program 1 and press the
SET/RESET button.
3. Highlight the day on which the heater
should warm up the vehicle.
4. Press the SET/RESET button to
confirm the selection. A cross appears
in the box next to the day to show that
this day is selected.
5. Continue in the same way to select all
the days on which the heater should
warm up the vehicle.
6. To set the time at which the vehicle
should be warmed up, highlight the
time at the top of the display and press
the SET/RESET button. The hours
start to flash.
7. Use the rotary control to adjust the
hours to the desired setting.
8. Press the SET/RESET button to
confirm the setting. The minutes start
to flash.
9. Use the rotary control to adjust the
minutes to the desired setting.
Climate Control
10.
11.
E74469
You can use the function Program 2 to set
a second cycle, for example different times
on different days or twice on the same day.
The programming procedure is the same
as for the function Program 1.
Programming the function One-Time
1. Highlight One-Time and press the
SET/RESET button. The hours start
to flash.
2. Use the rotary control to adjust the
hours to the desired setting.
3. Press the SET/RESET button to
confirm the setting. The minutes start
to flash.
4. Use the rotary control to adjust the
minutes to the desired setting.
5. Press the SET/RESET button to
confirm the setting.
6. Press the SET/RESET button to exit
the menu.
87
Press the SET/RESET button to
confirm the setting.
Press the SET/RESET button to exit
the menu.
Parkheater
Program 1
07:55
01:12:2006
OK = change