Using The Telephone - Vehicles With: Navigation System - Ford Kuga Owner's Manual

3. Scroll through the different phones by
using the seek buttons and display the
phone to be debonded.
4. Press the OK button to be debond.
USING THE TELEPHONE -
VEHICLES WITH: NAVIGATION
SYSTEM
This chapter describes the phone functions
of the Navigation System.
Note: Refer to your Navigation System
guide for details of the controls.
An active phone must be present.
Even if connected to the Navigation
System, your phone can still be used in the
usual way.
Making a call
Dialling a number
Phone numbers can be dialled using voice
control. See Voice control (page 202).
Ending a call
Calls can be ended by pressing either the
END button, the MODE button on the
remote switch or the ON/OFF button on
the navigation system.
Redialling a number
1. Press the PHONE button on the unit.
2. Select REDIAL.
Receiving an incoming call
Accepting an incoming call
Incoming calls can be accepted by pressing
either the call accept button, the MODE
button on the remote control, the PHONE
button on the unit or by using the ACCEPT
option in the menu.
Telephone
Rejecting an incoming call
Incoming calls can be rejected by pressing
either the call reject button, the CD or
AM/FM buttons on the unit, or by using
the REJECT option in the menu.
Receiving a second incoming call
Note: The second incoming call function
must be activated in your phone.
If there is an incoming call, whilst there is
an ongoing call, a beep will be heard and
you will have the option to end the active
call and to accept the incoming call.
Accepting a second incoming call
Second incoming calls can be accepted
by pressing either the call accept button,
the MODE button on the remote control,
the PHONE button on the unit or by using
the ACCEPT option in the menu.
Note: This will cancel the ongoing call.
Rejecting a second incoming call
Second incoming calls can be rejected by
pressing either the call reject button, or one
of the following buttons on the unit: CD,
AM/FM.
Muting the microphone
During a call, it is possible to mute the
microphone. Whilst muted, confirmation
will appear in the display.
SD navigation units
Press the mute button (symbol of a
microphone with a line through it). Press
the button once again to turn this function
off.
CD navigation units
Press the microphone mute button. Press
the button once again to turn this function
off.
200