Fisher & Paykel DishDrawer DD24D Series Installation Instructions Manual page 6

I (1,2) -2- 599618C DD24D install A2 U SCA.indd 15/4/09 10:02:23 AM
SECURE THE PRODUCT AND REFIT THE DRAWER
The product has three
pairs of mountinq
brackets: a pair of
optional brackets
on the top (C) and
two pairs of formed
brackets in the side of
the chassis (A,B). Use
at least two out of the
three pairs to secure
the product.
Ensure the sound
insulation is
repositioned
correctly.
optional
3A" (19 mm)
C
Ensure the drawer is
now rotated
clockwise back.
Ensure the drawer clips on
D/
........ ,," both sides are reset.
Before refitting the drawer,
ensure the hoses are not
twisted and the latches at
the rear of each drawer
runner are facing forward.
_} F_TTHE TOEK_CK
Where the toekick
meets the bottom
of the tub is the
cut-off point
lmportand
D o not overtighten screw.