Fisher & Paykel DishDrawer DD24D Series Installation Instructions Manual page 5

(1,1) -2- 599618C DD24D install A2 USCA.indd 15/4/09 10:02:23 AM
ROUTETHE HOSESAND MOVE _NTOTHE CAVITY
OR
REMOVETHE DRAWER AND LEVELTHE PRODUCT
Ensure the drawer is removed and
then rotated counter-clockwise
to prevent kinked hoses.
optional
(x2)
If top mounting brackets are being
used, ensure they're securely fitted
before sliding product into cavity.
Ensure hoses and cord
are not kinked or twisted.
Loosen feet only and _2
take care when pushing _q_'
the product into the /
cavity that you do not
bendthe feet.
Ensure product is level and aligning with cabinetry. Using the
most appropriate length Hexagonal socket supplied, fully extend
levelling feet up to required distance by hand.
Hexagonal socket
X4